 |
 
| |
|
 |
Catch Basin Traps
Standard Fabricated Aluminum
Standard Type, Enclosed Type, Vapor Tight, SNOUT
|
all traps
|
For CAD dwg and PDF files, scroll down to pattern links in specifications table below.
Syracuse Castings manufactures 4 types of Catch Basin Traps:
- Standard Type
The Standard Catch Basin Trap consists of two component parts:
the trap and the stainless steel hanger hooks (2). The Standard
Catch Basin Trap is installed to prevent floating debris from
entering and clogging the sewer line. The trap also creates an
effective water seal from sewer gases.
- Cast Iron for pipe sizes to 21"
- Fabricated Aluminum for pipe sizes to 21" and over
- Galvanized Fabricated Steel for larger pipe sizes
- Enclosed Type
The Enclosed Catch Basin Trap mounts directly into the outlet pipe
and when properly caulked can be made gas-tight. This type of trap
is also supplied with a cover for inspection or cleanout.
- Vapor Tight Type
The Vapor Tight Trap is gas-tight and principally specified at airports.
By design this trap reduces the possibility of any infiltration
of gases or vapors into the drainage system.
- Also available:
The SNOUT Oil-Water-Debris Separator
|
Typical Catch Basin
|
Standard Fabricated Aluminum Traps
Please contact our office for availability of elliptical pipe size traps.
|
- Material: 1/8" Aluminum Plate
- 1/4" Galvanized Fabricated Steel Plate for 48" & 54" sizes
- All Traps supplied with 1/2" x 1/2" x 6" stainless steel hooks
- Wall plates furnished upon request
|
|
|
|
|
 |
